1. Press MANUAL.
2. Enter the channel number.
3. Press MANUAL again.
SCANNING THE CHANNELS
To begin scanning channels or to start scanning again after
monitoring a specific channel, press SCAN.
SCAN and Up-symbol appear, and the scanner begins to
rapidly scan upward until it finds an active frequency.
If the scanner finds an active frequency, it stops and displays
that channel and frequency number, then it automatically
begins scanning again when the transmission ends on that fre-
quency.
Notes:
. You must store frequencies into channels before the scanner
can scan them.
. To change the scanning direction, press Up or Down.
. The scanner does not scan empty channels.
LISTENING TO THE MONITOR MEMORY
To listen to the frequency stored in the monitor memory, press
MANUAL then MON. MAN, MON and the frequency stored in
the monitor memory appear.
CLEARING A CHANNEL
1. Press MANUAL.
2. Use the number keys to enter the channel number contai-
ning the frequency you want to delete, then press PGM. Or,
repeatedly press PGM until the desired channel number appe-
ars. PGM appears.
3. Press CLEAR. The frequency number flashes.
4. Press L-OUT. L/O (lockout – see “Locking Out a Channel”)
appears, the channel number flashes, and the frequency num-
ber changes to 000.0000 to indicate the frequency is cleared.
5. To delete more frequencies, repeat Steps 2-4.
