2.
Press and hold the
/
BAND
key to display the
preprogrammed Search Bands. Use the
and
keys or VFO control until you see the Band you want.
3.
Wait for at least 2 seconds or press
/
BAND
for
Search to begin. If you wish to change the search
direction, press and hold
or
to search in an
up or down direction.
4.
When Search stops on a desired frequency, press
to stay on that frequency. The next available empty
channel to store the frequency will be blinking on
the display.
5.
To store the displayed frequency into that channel,
press
. The frequency will blink twice to confirm
the programming.
6.
To store the displayed frequency into another channel:
a.
Select the channel number with the numeric keys,
and press
. The selected channel will appear
on the display. The frequency currently stored in the
channel will appear for 2 seconds and then will be
replaced by the frequency located from the search.
b.
Press
. The frequency will blink twice to
confirm the programming.
Note:
If all channels have already been programmed and
key is pressed, “Full” is displayed. To program the
frequency, press
key again. To cancel the
programming, press
key.
Programming Channels with Alpha Characters
Use this feature to name channels (up to 100 channels) for
easy reference.
1.
Select the channel.
2.
Press
/
ALERT
to go to the Alpha Name display,
“
” appears on the display.
16
20
Y:...UB302BH(AE180H).vp
Tue Jul 08 16:24:35 2003
Color profile: Disabled
Composite Default screen
