19
Short manual AE 6690 – Fast to the point
The most important functions at a glance:
Before the first time turning on, programming of the corresponding country settings
Programming:
hold
FC
+
BP
key and turn on the radio. Display flashes, select with
channel knob
CH
the wished country setting and confirm with
FC
80/40
dE
Germany, Czech and Slovak Republic
40/40
EU
Belgium, Bulgaria, Germany, Finland, France, Greece, Ireland, Italy, Latvia,
Netherlands, Poland, Portugal, Romania, Switzerland, Spain
Please pay attention to the different registration- and due-rules in some
countries (see Radio Passport)
40 FM
EC
For temporary use on travelling in most of the EU cou
Croatia, Iceland, Norway, Switzerland. In most cases no registration
necessary. Please check the restrictions of use in the latest Radio Passport!
40 FM
U
United Kingdom channels
40/40
Po
For Poland only
40/40
E
For
Spain
only
Functions
VOL/ON
turn radio on, set wished volume
A/F
select type of modulation (AM or FM, if activated)
CH/UP/DN
select
channel
SQ
squelch: for repressing weak signals turn right. If the know is completely
on the right, you can only hear relevant strong signals. The best setting
is, where the basic noise is just disappears.
ASQ
automatic squelch setting on/off
Transmit
hold the button on the side until you finished transmitting.
FC
function key: press shortly and afterwards select the secondary function
you need (printed next to the key)
SC
Scan on/off: press
SC
longer than
3 seconds
and release the button
SCH
special
channel:
short:
switch to special channel.
Long:
select special
channel, confirm with
SCH
SW
special- and channel-watch: press
FC
, afterwards
SCH
BP
key confirmation tones on/off
RB
Roger Beep on/off: press
FC
and afterwards
BP
TSQ
Tone squelch (pilot tone or CTCSS) on/off: press
TSQ
Change
CTCSS:
hold
TSQ
, then select with the channel buttons and confirm
with
TSQ
CH9
direct button from your selected channel to channel 9 and back
TOT
Time out timer on/off
FR
displaying the frequency instead of the channel number: press
FC
and
afterwards
ASQ
M1 – M3
select
Memory:
FC
, afterwards
M1
,
M2
or
M3
Change memory: select channel, press
FC
and afterwards press long
M1
,
M2
Summary of Contents for AE 6990
Page 20: ...20 or M3 ...
