Albrecht Audio DR 895 CD, Manual

Page: 40 / 112

40 English
EN
14.5. Factory reset
A factory reset resets all user settings to default values, so that time and date, network configuration
and presets are lost. However, the DR 895 CD’s current software version is maintained.
14.6. Software Update
From time to time, software upgrades may be created with bug fixes and/or additional features. You
can either check manually or set DR 895 CD to check periodically automatically (this is the default).
If newer available software is detected, you will be asked if you want to go ahead with an
update. If you agree, the new software is then downloaded and installed. After a software upgrade,
all user settings are maintained.
NOTE: Before starting a software upgrade, ensure that DR 895 CD is plugged into a stable main
power connection. Disconnecting power during an upgrade may permanently damage the unit.
14.7. Setup Wizard
14.7.1. Time/Date
Display format
Select 12 or 24 as the time format.
14.7.2. Auto-Update
The time and date can be updated manually or automatically from
DAB, FM or your network. Auto-update works with data sent over
DAB, FM or the Internet. The clock is only updated when in a
corresponding mode, so it is best to select a mode you use regularly.
DAB and FM use time signals broadcast with radio transmissions. Network uses a time signal sent
from the Internet Radio portal when being in any network-connected mode.
14.7.3. Time Zone, Daylight Saving Time
Set your time zone. If your country uses the daylight saving time and it is in effect, turn on the
Daylight saving option.
14.7.4. Manual Update
If you set “No update”, the wizard prompts you to set the time and date manually. The date and
time are displayed as dd-mm-yyyy (day-month-year) and hh:mm (hour:minutes).
The active value is flashing. Adjust each value with the
navigate knob
or ▲/▼ on the remote
control. Once the value is set, press OK or ◄/► to continue setting the next value.
14.8. Info
View the firmware version and the radio ID.
14.9. Privacy policy
Here you will find the link for the current version of the privacy policy. Use a PC or mobile device to
access the statement.
14.10. Backlight
You may change the backlight for On level to High, Medium or Low and for the Dim level to Medium
or Low. Also adjust the Timeout duration after which turns the radio to Dim level after it has not been
used.
Setup wizard
Start now?
YES NO