Albixon ELEGANCE 70, Manual

Page: 27 / 84

Minimum space requirements
and device installation
Before installing the device itself, it is necessary to consider the technology space (sump) proportions
where you want to place the swim jet. Make sure in advance that you will not have any problems
due to a lack of space while installing the pump. The minimum recommended proportions of the
technology space required for the device installation, see pic.5 + table.
6.
width (mm) length A (mm) height B (mm)
750
1420 900
PIC. 5
B
A
1
Air outlet
2
Ventilation
3
To the el. switching
4
Water level
5
25 cm
1
2
3
4
5
8
/ Swim jet ELEGANCE 70
Use and settings of the ELEGANCE
swim jet
Once the jet stream is installed, it turns your pool into a place of rest and relaxation thanks to the
pleasant thrill of a stream of the water or water with air which the unit creates. Press the pneumatic
switch to set the swim jet from the pool (no. 1 pic. 6). The switched on swim jet blows out a stream of
water or water with air. It depends on the setting of the front nozzles (pic. 6). Only the water stream:
Maximum water flow is achieved by turning the inside jet (no. 2 in pic. 6) to the left. You will reduce
the water current by turning the nozzle to the right. The water stream with air: For setting or reducing
the air flow, turn the outside of the nozzle (no. 3 pic. 6).
7.
PIC. 6
1
2 3
MAXIMUM FLOW
MINIMUM FLOW
DETAIL OF SWIM JET NOZZLE
Swim jet ELEGANCE 70 /
9
ELEGANCE 70 / 80 / 95 |
25