background image

      

Warranty conditions

Warranty conditions

The warranty conditions are governed by the commercial and warranty conditions of your supplier.

Safe liquidation of the product at the end of its useful life

Once the product’s useful life has ended, please ensure its ecological liquidation by a specialised company.

Complaints and service

Claims are governed by the relevant acts on consumer protection. 
In the event of any irreparable defects, please contact your supplier in writing.

Date ................................................................

Supplier

8.

 WARNING

  

Persons installing the light must be authorised to do (in compliance with Regulation 
no. 50/1978 Coll.). 

  

All safety regulations and the relevant standards must be adhered to and contact by 
persons with electric voltage must be avoided. 

  

Any maintenance, replacement of components or handling of the light, is only 
permissible after it has been safely disconnected from the mains.

  

Do not touch the light in the water or even on the side of the pool if you have wet 
hands or feet .

  

The supplier waives any liability for the product if it is not used as set out in these 
instructions or if non-original spare parts are used.

6

  

/  Pool light 300W/12V

Summary of Contents for 300W/12V









Reviews: