Package contents
Spotlight for vinyl lined or prefabricated swimming pools
•
mounting box:
1x
•
self-adhesive sealing strip for the box: 2x
•
box flange:
1x
•
the light:
1x
•
bag with connecting material
Basic information
This light is designed for the illumination of swimming pools. It must be fitted vertically on the wall
of the swimming pool and completely immersed in the water. This is a class III electrical product for
low voltage AC 12 V.
The light complies with international safety standards and lighting standards.
The supplier shall not bear any liability in the case of incorrect use, modification and other application
of this product other than that for which it is intended
Positioning the light and fitting
the mounting box
•
Never fit the light horizontally.
•
For clear illumination of the inside of the swimming pool, we recommend using one 300 W light
for every 25 m
2
of pool area. For very deep swimming pools (more than 2 m), we recommend
using one light for every 30-40 m
3
of water.
•
In order to avoid glare from the light, we recommend fitting them on the side of the swimming
pool which you usually approach it from.
•
If the light are used in competition or training swimming pools, position the light on the longer
sides to avoid dazzling the swimmers.
•
In order to avoid the need to drain the swimming pool when replacing bulbs in the light, we
recommend you position the light in a place which is easily accessible from the edge of the
swimming pool.
Before fitting the light, check that the cable duct is appropriately tightened. If it is not tightened
sufficiently, water could leak in; if it is too tight, it may burst.
The light should be positioned vertically on the wall of the swimming pool at a depth of 400 - 700 mm
under the surface of the water (Fig. 1).
1.
2.
3.
Pool light 300W/12V /
3
