Manuale istruzioni
-FKC 65 UB
01/01/19 Rev: 1.0.0
34
14.2 DESCRIPTION OF CONTROL
FKC 65 UB
14.2.1 ON/OFF KEY SWITCH (1)
It controls electrical power supply to the machine's functions. To switch on the machine,
turn the key to the ON symbol. When it is switched on with the key, the machine has
electrical system energised, flashing light on, the possibility to lift and lower the brush
plate.
14.2.2
BRUSH ROTATION ACTIVATION SWITCH (2)
This switch controls brush rotation.
To start rotation, press the switch. The brush motor is powered and to start rotation just
press the accelerator pedal.
If the speed control pedal is at idle, the brushes and solution flow are stopped
14.2.3
EXTRACTION ACTIVATION SWITCH (3)
This switch controls activation of the extraction turbine.
To start extraction, press the switch.
If the brush plate is lifted, or the machine stops, the solution flow is interrupted and the
vacuum turbine is automatically disabled with a 5 second delay. This delay is to allow
the water recovered from the floor, contained in the extraction pipe, to be eliminated.
14.2.4
BRUSH PLATE LIFTING SWITCH (4)
Per
FKC 65 UB
: The switch controls the ascent or the descent of the whole brushes
plate, including the wiper, in a variety of different positions, thus offering the possibility
to adjust the brush pressure on the floor according to the position chosen
14.2.5
BRUSH PRESSURE INDICATOR (5)
On FCK 65UB scrubber-dryer, the switch, described in the previous point, checks the
pressure exerted on the floor by the brushes. To decrease pressure, press the top of the
switch. To increase pressure, press the bottom of the switch.
The indicator beside the switch indicates the pressure value of the brushes. Once the
brushes plate is lowered on the floor, at the end stroke and while operating, this indicator
will signal with a red colour (more pressure) to green (less pressure) the force exerted on
the floor by the brushes (and the corresponding electric motor absorption).
It is recommended, depending on the state of dirt of the floor or on the floor type, to lift
the brush plate until the machine is operated with green light on, so to have a longer
battery service life. In case of very dirty floor, where it is necessary to have a high brush
pressure, the machine should be operated with the indicator turned red.
The flashing red indicator means the maximum pressure allowed for brushes has been
reached.
The load that can be exerted on the floor by brushes is adjustable from a minimum of 0
kg, up to a maximum of 41 kg .
Summary of Contents for FKC 65 UB
