Manuale istruzioni
-FKC 65 UB
01/01/19 Rev: 1.0.0
30
In the case of a double pass move the lever on UP
FKC 65 UB : you can vacuum without rotating the brushes.
13.2. EMPTYING AND CLEANING THE RECOVERY TANK
1. Press the switch on the control panel to lift the brush plate, stop the motor and flow of
solution and de-activate the extraction turbine.
2. Place the vehicle near a floor drain. The discharge pipe is at the rear of the machine.
3. Turn the ignition key to “OFF”, the parking brake is engaged.
4. Remove the drain hose from the hook. Unscrew the cap and lower the discharge pipe
towards the floor drain. Stay behind the end of the pipe. Lock the filthy water by pressing
the rubber; remove the cap from the drain hose slowly. The recovered solution escapes
with adjustable pressure from the rubber hose above mentioned.
5. Remove the upper tank cover.
6. Wash the recovery tank with clean water. Repeat washing until clean water issues from
the discharge pipe. Do not use water at temperature higher than 50°C as it might damage
the tank.
7. Replace the cap and the discharge pipe.
8. If the machine must be left inactive for a long period of time do not reassemble the
recovery tank upper cover and the drain hose cap, to allow air to circulate inside it.
Tubo di scarico acqua sporca con controllo flusso (flow control)
Summary of Contents for FKC 65 UB
