Alberici LAND, Operator'S Manual

Page: 13 / 41

13
7.3 Menu functions
7.3.1 S
URF THE
M
ENU
:
Locate the in-line 3 button-keys on the p.c. board rear side. Get access to the menu by
holding the three buttons pressed at the same time for 5 seconds.
“OK” key confirm selection
“+” / “ –“ key navigate menu UP and DOWN; or, modify figures and letters
REG trimmer adjust display brightness
Else, it is possible to temporarily connect the external keypad (K-P3N- 000006) to the ‘Program’ socket in
the rear side of the p.c. board.
7.3.2 M
ENU STRUCTURE
When switching to the menu, the following set of icons get diisplayed on the screen:
Use the “ + ” button -key to highlight the icon of the menu function you want to check: the description of the
highlighted icon will appear at the bottom of the screen (e.g. SHOW STATUS OF PERIPHERAL UNITS
for the first icon, EMPTYING DISPENSERS for the fifth, EXIT for the last one). Press the “OK” button -
key to access the function.
7.3.3 S
HOW
P
ERIPHERAL
U
NITS
This sub-menu allows to check the state of the peripheral units in the system (connected or not, in error, empty):
Press OK to return to the menu upper level.
7.3.4 S
HOW
A
CCOUNTS
This menu allows to read the cashed totals and partials, the totals and partials paid out. Partials are made available
for banknotes and for coins/tokens. E.g., if Hopper 1 = 2 €, Hopper 2 = 1 €, Hopper 3 = 0,50 €, Hopper 4 = 0,10 €:
MENU
SHOW PERIPHERAL UNITS