A10-RTK Instruction Manual
3 Start-up procedure
For the start-up procedure, the
A10-RTK
sensor needs an external power supply. The standard
delivery includes a power supply unit with a power cable and a multiport adapter (see Fig. 5).
Connect the power supply unit to the multiport adapter and plug it into the 26-pin port (Sub-D
HD26) of the
A10-RTK
(see Fig. 2). When the power supply is connected, all LEDs flash. The
A10-RTK
sensor can be switched on either by pressing the power button or by activating the Auto-
Power-On function. The flashing system LED indicates the starting process, which is completed
after approx. 30 seconds.
Connect the GNSS antenna (TNC connector) and the GSM antenna (SMA connector) to the sensor
(see Fig. 2).
Warning:
The
A10-RTK
automatically performs a pin request of the SIM card during start-up.
Before the first operation, use the configuration software to configure the different mobile settings
(SIM card PIN, server, etc.).
The selected configuration (mobile network settings, data stream) is now stored in the
A10-RTK
so that the sensor will automatically work with these settings the next time it is used. Pressing the
power button turns off the
A10-RTK
.
Figure 5:
A10-RTK with multiport adapter, power supply unit, GSM antenna and GNSS antenna (standard
delivery)
13
