Network Communication Connection
4200-097
16-1
Revision 1.06
16.
Network Communication Connection
The LAN network connector allows the UXTM to be connected to a Eithernet network. From an existing
network, connect the network cable to the LAN connector on the UXTM.
Figure 21 - Network Connection
16.1
Network Protocols Supported
There are several protocols supported by the network interface and will require specific ports to be
opened up on the network. The following lists the supported protocols that can be used:
TCP 502 (Modbus)
TCP 3002 (Application debug port)
TCP 9999 (Telnet setup)
TCP 10001 (TCP to serial pass through)
UDP 69 (TFTP), only to load code updates
UDP 161 (SNMP)
UDP 162 outbound (SNMP traps)
