Mainboard PX915-SLI
11
Connectors
Floppy Disk Drive Connector: FDC
The mainboard provides a standard floppy disk drive connector (FDC) that supports 360K,
720K, 1.2M, 1.44M and 2.88M floppy disk drive and supports with the FDD ribbon cable.
Hard disk drive Connectors
The mainboard provides one IDE Connector that supports PIO Mode 0~4, BUS Master,
Ultra ATA 66/100/ 133 specification, and supports four Serial ATA connectors with
150MBps transmission speeds. These connectors also support to work with the IDE cable
and SATA cable (optional).
Primary IDE Connector: IDE1
There are maximal two IDE devices can be attached to this connector. If you attach two
IDE hard disk drives, you must configure one as the master and the other one as the slave,
so that these HDDs can be worked normally. However, the optical devices, i.e., CD-ROM,
DVD-ROM…etc. should be attached to this connector as well.
Serial ATA Connector:
SATA1/2/3/4
The SATA 1/2/3/4 connectors support SATA 150 Mbps transmission speeds for SATA HDDs.
One SATA connector only can attach one SATA HDD of each time.
