Mainboard PX915-DV
28
S
U
U
U
A
P
K
H
O
O
U
ATA Port
This option will display which IDE channel will be used to the SATA device.
Options: SATA2, 4 is channel 1
Onboard Device
SB Controller
This option should be enabled if your system has a USB port installed on the system board. You will
need to disable this feature if you add a higher performance controller.
Options: Enabled (default),Disabled
SB 2.0 Controller
This option should be enabled if your system has a USB 2.0 device installed on the system board. You
will need to disable this feature if you install a USB 1.1 device.
Options: Enabled (default),Disabled
SB Keyboard Support
Enables support for USB attached keyboards. Options: Disabled (default),Enabled
udio Device
This option allows you to control the onboard audio. Options: Auto (default),Disabled
Onboard I/O Chip Setup
ower On Function
This option allows you to select a way to power on your computer.
Options: Password,Hot KEY,Mouse Left,Mouse Right,Any KEY,BUTTON ONLY (default), and Keyboard 98
B Power-On Password
This option is as a part of power-on sequences with your system. This option is configurable only when
“Power-On Function” is set with “Password”.
ot Key Power ON
This option allows you to use the Ctrl key along with a hot key (function key) to power on your system.
This option is configurable only when “Power-On Function” is set to “Hot Key”. Options:
Ctrl-F1,Ctrl-F2…… Ctrl-F12
nboard FDC Controller
Select “Enabled” if your system has a floppy disk controller (FDC) installed on the system board and
you wish to use it. If you install an add-in FDC or the system has no floppy drive, select “Disabled”.
Options: Enabled (default),Disabled
nboard Serial Port 1
Select an address and corresponding interrupt for the first/ second serial port.
Options: Disabled,3F8/IRQ4 (default for port1),2F8/IRQ3,3E8/IRQ4,2E8/IRQ3,Auto
.
ART Mode Select
This option allows you to select the Infra Red (IR) standard to be used.
Options: Disabled (default),IrDA
