PX848 Like Series
34
3. User Defined (default)
Allows you to set each mode individually.
When this option is enabled, each of the ranges are from 1 min. to 1 hr. except for HDD Power Down,
which ranges from 1 min. to 15 min. and includes a “disable” option.
Note: If you select Min. or Max. Power Saving modes, the “HDD Power Down” value and the
“Suspend Mode” value are both fixed.
MODEN Use IRQ
This item determines the modem’s IRQ.
Options: 3(default)
、
4
、
5
、
7
、
9
、
10
、
11
、
NA
Video Off In Suspend
This determines whether power to the monitor is switched off when the computer is in suspend mode.
Options: Yes
、
No (default)
Video Off Method
This option determines the manner in which the monitor goes blank.
Options:
V/H SYNC+Blank
This selection will cause the system to turn off the vertical and
horizontal synchronization ports and write blanks to the video buffer.
Blank Screen This option only writes blanks to the video buffer.
DPMS Support (default)
Initial display power management signaling.
HDD Power Down
When enabled, the hard disk drive will power down after a certain configurable period of system
inactivity. All other devices remain active.
Options: Disabled (default)
、
1 Min
、
2 Min
、
3 Min
、
4 Min
、
5 Min
、
6 Min
、
7 Min
、
8 Min
、
9 Min
、
10 Min
、
11 Min
、
12 Min
、
13 Min
、
14 Min
、
15Min
Suspend Mode
This item allows you to select the suspend time under the ACPI operating system.
Options: Disabled(default)
、
1Min
、
2Min
、
4Min
、
8Min
、
12Min
、
20Min
、
30Min
、
40Min
、
1Hour
Soft-Off by PWRBTN
Pressing the power button for more than 4 seconds forces the system to enter the
Soft-Off state when the system has “hung.”
Options: Delay 4 Sec, Instant-Off (default).
