PX848 Like Series
30
IDE Primary / Secondary /Master / Slave UDMA
Ultra DMA/100 functionality can be implemented if it is supported by the IDE hard drives in your
system. As well, your operating environment requires a DMA driver (Windows 95 OSR2 or a third
party IDE bus master driver). If your hard drive and your system software both support Ultra
DMA/100, select “Auto” to enable BIOS support. Options: Auto (default)
、
Disabled
Onboard Device
USB Controller
This option should be enabled if your system has a USB port installed on the system board. You will
need to disable this feature if you add a higher performance controller.
Options: Enabled (default)
、
Disabled
USB 2.0 Controller
This option should be enabled if your system has a USB 2.0 device installed on the system board.
You will need to disable this feature if you install a USB 1.1 device.
Options: Enabled (default)
、
Disabled
USB Keyboard Support
Enables support for USB attached keyboards. Options: Disabled (default)
、
Enabled
Onboard Audio Device
This item allows you to control the onboard audio. Options: Auto (default)
、
Disabled
Onboard LAN Boot ROM
Decide whether to invoke the boot ROM of the onboard LAN chip. Options: Disabled (default)
、
Enabled
Onboard I/O Chip Setup
Power ON Function
This option allows you to select a way to power on your computer. Options: Password
、
Hot KEY
、
Mouse Left
、
Mouse Right
、
Any KEY
、
BUTTON ONLY (default)
、
Keyboard 98
KB Power On Password
Supply a password that your system will use as part of the power-on sequence. This field is only
configurable when “Power On Function” is set to “Password”. The password limitation is 3 bytes.
And you have to press and hold the password one by one but in order.
