PX845PEV/ GEV Series
35
AGP Aperture Size (MB)
Select the size of the AGP (Accelerated Graphics Port) aperture. The aperture is a portion of
the PCI memory address range dedicated for graphics memory address space. Host cycles
that hit the aperture range are forwarded to the AGP without any translation.
Options: 4
、
8
、
16
、
32
、
64 (default)
、
128
、
256
＊＊
On-Chip VGA Setting
＊＊
(only for PX845GEV series )
On-Chip VGA
This item allows you to enable or disable the on-chip VGA.
Options: Disabled
、
Enabled (default)
On-Chip Frame Buffer Size
Choose the size of the on-chip frame buffer. Options: 1MB
、
8MB (default)
PnP/PCI Configurations
Reset Configuration Data
Select “Enabled” to reset the Extended System Configuration Data (ESCD) if you have
installed a new add-on card and the system reconfiguration has caused such a serious
conflict that the OS cannot boot.
Options: Disabled (default)
、
Enabled
Resources Controlled By
BIOS can automatically configure all the boot and Plug and Play compatible devices. If you
choose Auto, you will not be able to manually assign IRQ DMA and memory base address
fields, since BIOS automatically assigns them.
Options: Auto <ESCD> (default)
、
Manual
IRQ Resources
When resources are controlled manually, you can assign each system interrupt a type,
depending on the type of device using the interrupt. This is only configurable when
“Resources Controlled By” is set to “Manual”.
IRQ-3
assigned
to:
PCI
device
IRQ-4
assigned
to:
PCI
device
IRQ-5
assigned
to:
PCI
device
IRQ-7
assigned
to:
PCI
device
IRQ-9
assigned
to:
PCI
device
IRQ-10
assigned to: PCI device
IRQ-11
assigned to: PCI device
IRQ-12
assigned to: PCI device
IRQ-14
assigned to: PCI device
IRQ-15
assigned to: PCI device
