PX845PE/GE Series
43
IDE HDD Block Mode
Block mode is otherwise known as block transfer, multiple commands, or multiple sector
read/write. Select the “Enabled” option if your IDE hard drive supports block mode (most
new drives do). The system will automatically determine the optimal number of blocks to
read and write per sector. Options: Enabled (default)
、
Disabled
INTEL OnChip PCI Device
If you highlight the “INTEL OnChip PCI Device” label and then press the enter key, it will
take you a submenu with the following options:
USB Controller
This option should be enabled if your system has a USB port installed on the system board.
You will need to disable this feature if you add a higher performance controller.
Options: Enabled (default)
、
Disabled
USB 2.0 Controller
This option should be enabled if your system has a USB 2.0 device installed on the system
board. You will need to disable this feature if you install a USB 1.1 device.
Options: Enabled (default)
、
Disabled
USB Keyboard Support
Enables support for USB attached keyboards. Options: Disabled (default)
、
Enabled
AC’97 Audio
This option allows you to control the onboard AC’97 audio.
Options: Auto (default)
、
Disabled
Onboard LAN Device
This option allows you to control the onboard LAN Device.
Options: Enabled (default)
、
Disabled
Onboard Raid Device
This option allows you to control the onboard RAID Device.
Options: Enabled (default)
、
Disable
Init Display First
With systems that have multiple video cards, this option determines whether the primary
display uses a PCI slot or an AGP slot. Options: Onboard/AGP (default)
、
PIC Slot
Onboard Raid Boot First
This option allows you to enabled or disabled the Raid device to boot first.
Options: Enabled (default)
、
Disable
