PM845G Series Mainboard
29
MPS Version Control for OS
The 1.1 version is elder version, supports 8 more IRQ in Windows NT. Choose the new
1.4 version for Windows 2000 and Windows XP. Options: 1.1, 1.4 (default)
OS Select For DRAM > 64MB
Select OS2 only if you are running OS/2 operating system with greater than 64MB of
RAM on the system. Options: Non-OS2 (default), OS2.
HDD S.M.A.R.T. Capability
Self Monitoring Analysis and Reporting Technology is a technology that enables a PC
to in some cases predict the future failure of storage drives.
Options: Disabled (default), Enabled.
Small LOGO (EPA) Show
This item allows you to show or hide the small LOGO of EPA.
Options: Disabled (default), Enabled.
Advanced Chipset Features
Dram Timing Selectable
Set the way to select the dram timing. Choose Manuel, the following options become
adjustable. Options: Manuel, By SPD (default)
CAS Latency Time/ Active to Precharge Delay/DRAM RAS # to
CAS# Delay/ DRAM RAS # Precharge
This item determines CAS Latency. When synchronous DRAM is installed, number of
clock cycles of CAS latency depends on the DRAM timing. Do not reset this field from
the default value specified by system designer. These options default value depend on the
SPD value of DIMM.
Refresh Mode Select
Select the refresh mode. Options: 15.6 us, 7.8 us, 64 us, Auto.
Turbo Mode
Allow you to set the turbo mode. Options: Disabled (default), Enabled.
Memory Frequency For
This option allows you to set the memory frequency. Options: Auto,
DDR 200 => For PM845G/ GL/ GV
、
DDR 266 => For PM845G/ GL/ GE/ GV
、
DDR 333 (Delug Mode) => For PM 845G
、
DDR 333 => For PM845GE
。
