Albatron PI960GLE, User Manual

Page: 20 / 35

Mainboard PI960GLE
16
Printer Interface Header: PRT PORT
This mainboard provides a PRT header for you connecting an additional printer connector on your case
back panel. Attach the cable of printer connector (Optional) onto this header, and then you can use the
printer connector connecting with a printer.
Pin Assignment Pin Assignment
1 RSTB- 2 RAFD-
3 RPDR0 4 ERR-
5 RPDR1 6 RIVIT-P-
7 RPDR2 8 KSLIN-
9 RPDR3 10 GND
11 RPDR4 12 GND
13 RPDR5 14 GND
15 RPDR6 16 GND
17 RPDR7 18 GND
19 ACK- 20 GND
21 BUSY 22 GND
23 PE 24 GND
PRT PORT
25 SLCT 26 GND
Power for LVDS Connector Header: JP4, JP5
When you connect one LVDS flat panel or other compatible devices, you must adjust the jumper caps on
the JP4 and JP5 headers to enable this functionality. Please refer to the table below.
JP4 Assignment
Pin 1-2 Closed
LVDS Power +5V
Pin 2-3 Closed
LVDS Power +3.3V(Default)
JP5 Assignment
Pin 1-2 Closed
LVDS Power +12V (Default)
Pin 2-3 Closed
LVDS Power +5V
Note: “Closed” means putting a jumper cap onto two adjacent header pins.