Albatron PI945GSE-270 User Manual Download Page 11

Page: 11 / 63

User’s Manual

PI945GSE-270

User’s Manual

1.1 Welcome!

Thank you for buying an ®

PI945GSE-270

motherboard!

The motherboard delivers a host of new features and latest technologies, making it another

standout in the long line of quality motherboards!

Before you start installing the motherboard, and hardware devices on it, check the items in

your package with the list below.

1.2 Package contents

Check your motherboard package for the following items.

Before you begin installing your single board, please make sure that the following materials

have been shipped:

1 x

PI945GSE-270

Mini ITX Main board

1 x CD-ROM contains the followings:

•

User’s Manual in PDF file

•

Drivers

1 x IDE cable (40-pin)

2 x SATA cable kit (SATA/Power)

1 x I/O Shield

1 x Startup Manual

If any of the above items is damaged or missing, contact your

retailer.

Summary of Contents for PI945GSE-270
































































Search results

Summary of Contents for PI945GSE-270

Reviews:

Related manuals for PI945GSE-270

Brands by name

Popular brands

Albatron PI945GSE-270, User Manual

Search results

Summary of Contents for PI945GSE-270

Reviews:

Related manuals for PI945GSE-270

Brands by name

Popular brands