32
When set to “On”, you need a LAN add-on card which supports the power on function. It should also
support the wake-up on LAN jumper. Options: OFF (default)
、
ON
PCI PME Wake Up
When you select “Enabled”, a PME signal from any PCI card will awaken the system from suspend
mode. Options: Disabled (default)
、
Enabled
Ring Wake Up
This option allows you to awaken the system upon receiving an incoming call to modem device.
Options: Disabled (default)
、
Enabled.
RTC Wake Up
When “Enabled”, you can set the date and time at which the RTC (real-time clock) alarm awakens the
system from Suspend mode. Options: Enabled
、
Disabled (default).
Date (of Month) Alarm
You can choose which date of the month the system will boot up. This field is only configurable when
“RTC Wake Up” is set to “Enabled”.
Time (hh: mm: ss) Alarm
You can choose the hour, minute and second the system will boot up. This field is only configurable
when “RTC Wake Up” is set to “Enabled”.
IRQs Activity Monitoring
Press Enter to access a sub menu used to configure the different wake up events (i.e. wake on LPT &
COMM activity).
Primary INTR
On
IRQ3 ( COM2 )
Enabled
IRQ4 ( COM1 )
Enabled
IRQ5 ( LPT2 )
Enabled
IRQ6 ( Floppy Disk )
Enabled
IRQ7 ( LPT1 )
Enabled
IRQ8 ( RTC Alarm )
Disabled
IRQ9 (RQ2 Redir)
Disabled
IRQ10 (Reserved)
Disabled
IRQ11 (Reserved)
Disabled
IRQ12 (PS/2 Mouse)
Enabled
IRQ13 (Coprocessor)
Enabled
IRQ14 (Hard Disk)
Enabled
IRQ15 (Reserved)
Disabled
