24
Create Array
1.
The “Create Array” option will allow you to initialize a RAID array. Choose the “Create
Array” on the main screen and press <Enter>. The screen below will display.
According to your needs, select “RAID 0 for performance” (striping), “RAID 1 for data
protection” (mirroring) or “RAID SPAN for capacity” (JBOD). Then press <Enter>.
2.
Next, choose the “Auto Setup for Data Security” option and press <Enter>. The
screen will display a confirmation message as shown below. Press <Y> to continue
with the creation of the new array.
Attention
The “Channel”
、
“Drive Name”
、
“Mode”
、
“Size (GB)”, located at the
bottom portion of the screen above, reflect the devices that are currently
installed on the SATA connectors. The example information above may
therefore differ with the information that displays on your screen.
Attention
For RAID 1 (Mirrored Arrays), you can manually select the “source
device” instead of having the system determine it for you. After step 1,
select the “Select Disk Drives” to manually select the “source device”.
Then choose the “Start Create Process” and press <Enter> to complete the
RAID 1 array creation.
