KM333 Series
47
Appendix I: Super 5.1 Channel Setup
This appendix describes the installation procedures for 5.1 Channel Setup. Note that if
your operating system is Windows 98/ ME/ 2000, go directly to step 3.
1. Beginning with the “Start” button, select
Setting
&
Control Panel
&
Sounds, Speech,
and Audio Devices
&
Sounds and Audio Devices
. The screen below will display. First
check the “Place volume icon in the taskbar” in the Device volume block. Then press the
“Advanced…” button to configure the speaker settings.
2. At the “Advanced Audio Properties” screen use the drop-down box to select the “5.1
surround sound speakers”. Click “Apply” to enable the 5.1 channel audio effect.
3. On your desktop, double click the volume icon that is on the desk bar.
(Note: As described earlier, begin with this step if your system has Windows 98/ ME/ 2000)
