KM333 Series
38
PCI Master
When set to “On”, you need a LAN add-on card which supports the power on function. It
should also support the wake-up on LAN jumper. Options: OFF (default)
、
ON
PCI PME Wake Up
When you select “Enabled”, a PME signal from any PCI card will awaken the system from
suspend mode. Options: Disabled (default)
、
Enabled.
Ring Wake Up
This option allows you to awaken the system upon receiving an incoming call to a
modem device. Option: Disabled (default)
、
Enabled.
RTC Wake Up
When “Enabled”, you can set the date and time at which the RTC (real-time clock) alarm
awakens the system from Suspend mode. Options: Enabled
、
Disabled (default)
Date (of Month)
You can choose which month the system will boot up. This field is only configurable
when “RTC Wake Up” is set to “Enabled”
Resume Time (hh: mm: ss)
You can choose the hour, minute and second the system will boot up. This field is only
configurable when “RTC Wake Up” is set to “Enabled”
IRQs Activity Monitoring
Press Enter to access a sub menu used to configure the different wake up events (i.e.
wake on LPT & COMM activity).
Primary INTR On IRQ9 (IRQ2 Redir)
Disabled
IRQ3 (COM2) Enabled IRQ10 (Reserved)
Disabled
IRQ4 (COM1) Enabled IRQ11 (Reserved)
Disabled
IRQ5 (LPT2) Enabled IRQ12 (PS/2 Mouse)
Enabled
IRQ6 (Floppy Disk) Enabled IRQ13 (Coprocessor)
Disabled
IRQ7 (LPT1) Enabled IRQ14 (Hard Disk)
Enabled
IRQ8 (RTC Alarm) Disabled IRQ15 (Reserved)
Disabled
Options: Disabled (default)
、
Enabled
