Mainboard K8X250
10
Audio Ports: JAUDIO
This mainboard provides three Audio Ports, the Mic-in, Line-in and
Line-out. These are standard audio ports that provide basic audio
functionality.
Line-In
(
Blue
)
This port is for audio input and used to attach an external audio device
such as a CD player, tape player, etc. When the Super 5.1 Channel
Audio Effect is enabled, this port will output audio for the rear
speakers.
Line-Out
(
Green
)
This port is an output audio port used for connecting to speakers or a headset. When the Super
5.1 Channel Audio Effect is enabled, this port will output audio for the front speakers.
Mic-In
(Pink)
This port is for connecting to a microphone. When the Super 5.1 Channel Audio Effect is
enabled, this port will output audio for your subwoofer/center speakers.
.
Connectors
Floppy Disk Drive Connector: FDD1
The mainboard provides a standard floppy disk drive connector (FDD1) that supports 360KB/
720KB/ 1.2MB/ 1.44MB/ 2.88 MB specifications. You can attach a maximum of two floppy disk
drives using a FDD ribbon cable.
Hard disk drive Connectors:
The mainboard provides two IDE connectors that support PIO mode 0~4, Bus Master, and Ultra
DMA 33/66/100/ 133 specifications. You can attach a maximum of four IDE devices, such as
hard disk drive (HDD), CD-ROM, DVD-ROM, and so on using the IDE ribbon cables.
Primary IDE Connector: IDE1
There are two IDE devices can be attached onto this IDE connector. If you attach two IDE
HDDs, you must configure one drive as the master and the other one as the slave.
Secondary IDE Connector: IDE2
The IDE2 connector can also be attached with two HDDs using an IDE ribbon cable; however,
you also must configure one as the Master and the other one as the Slave.
SATA Connector: JSATA4/JSATA5
The two SATA connectors support SATA 150 Mbps transmission speeds and support RAID 0/1/
0+1/ JBOD mode for SATA HDDs. One SATA connector only can attach only one SATA HDD at
a time.
This mainboard supports Super 5.1 Channel Audio Effect which allows you
to transform your 2 speaker audio system into a 6 speaker audio system.
See
Appendix I
for more information.
