K8Ultra-U Series
39
Installing SATA Driver during Windows
®
2000/XP Installation.
Follow the instructions in this section if you are performing a new installation of
Windows
®
2000/XP and you wish to boot from a drive attached to the SATA connector.
1.
Copy the “ULi SATA Driver” from the bundle CD Driver to a floppy disk.
【
CD File
Location Path => CD-ROM : \ Driver \ SATA\ Floppy\ copy all files
】
2.
Power off the system. Connect the SATA hard disk to one of the SATA connectors.
Power up the system.
3.
Place your Windows
®
2000/XP CD into the CD-ROM/DVD drive. When the “Windows
Setup” screen displays, press “F6”.
4.
Press 's' when setup asks if you want to specify an additional device. Insert the
floppy disk which includes the “ULi SATA Driver” into the floppy drive.
Press 'Enter' and select the appropriate OS device driver.
5.
Press 'Enter' again to continue the setup process.
6.
Follow the setup instructions and select your choice for partition and file system.
7.
After setup examines your disks, it will copy files to the Windows
®
2000/ XP
installation folders and restart the system. After the system is rebooted the setup
program will continue with the installation all the way to completion.
8.
Wait until Windows® 2000/ XP finishes installing devices, regional settings,
networking settings, components, and the final set of tasks. Reboot the system if
you are asked to do so.
