K8Ultra-U Series
26
IRQ-12 assigned to: PCI device
IRQ-14 assigned to: PCI device
IRQ-15 assigned to: PCI device
PCI / VGA Palette Snoop
Some graphic controllers that are not VGA compatible take the output from a VGA
controller and map it to their display as a way to provide boot information and VGA
compatibility. Options: Disabled (default)
、
Enabled
PCI Latency Timer (CLK)
This item allows you to set up the PCI Latency Time (0-255). If you select the “32” it will
optimize PCI speeds. Options: 0-255
、
32 (default)
Frequency/Voltage Control
Spread Spectrum
The Spread Spectrum function can reduce the EMI (Electromagnetic Interference)
generated. Options: Enabled (default)
、
Disabled
PCI Speed Setting
This item allows you to set the PCI frequency. Options: Auto (default)
、
33.0
、
37.7
、
44.0
CPU Speed Detected
This item displays the CPU speed information detected by the system.
CPU Host Frequency (MHz)
This item displays the CPU Host frequency. You can set it from 200 to 333 for overclock.
The default depends on your CPU frequency. Default: depends on CPU
Hammer Fid control
This field allows you to set the CPU Ratio. If your CPU is locked, you will not be able to
adjust this field. The default depends on your CPU.
Hammer Vid control
This field allows you to adjust the CPU core voltage. Options: Start Up(default), 1.550V,
1.525V, 1.500V, 1.475V, 1.450V, 1.425V, 1.400V, 1.375V, 1.350V, 1.325V, 1.300V, 1.275V, 1.250V,
1.225V, 1.200V, 1.175V, 1.150V, 1.125V, 1.100V, 1.075V, 1.050V, 1.025V, 1.000V, 0.975V, 0.950V,
0.925V, 0.900V, 0.875V, 0.850V, 0.825V
CPU Voltage (Volt)
This item allows you to adjust your CPU core voltage.
Options: default, +5%, +10%,+15%
DDR Voltage (Volt)
This item allows you to adjust the RAM voltage. Options: default, 2.75.,2.80,2.85
AGP Voltage (Volt)
This item allows you to adjust the AGP Voltage. Options: 1.5 (default)
、
1.7
