Albalá Ingenieros TTD3000C03, Manual

Page: 15 / 28

Albalá Ingenieros | Manual TTD3000C03
Coaxial cabling with a characteristic impedance of 50 or 75Ω must be used to provide
connections for TTL level digital signals depending upon the requirements of the
installation. The output impedances of the distributor module must be configured using
the control software.
Connections to the loop-through inputs must be terminated with a resistance of the
same value as the characteristic impedance of the coaxial cabling used.
The rear interconnection board is not designed to withstand mechanical stress. The
wiring must be fastened properly to the frame where the mounting frame is housed to
prevent the rear board from supporting the weight of the cables.
15