Albalá Ingenieros PDC3002C01, Manual

Page: 21 / 28

Albalá Ingenieros | Manual PDC3002C01
UNLOCK_B_MASK 0x02 0x08 N N Allows masking VCXO unlock fail (Section B)
0=Disabled, 1=Enabled
NO_SIG_A_MASK 0x02 0x10 N N Allows masking no composite video signal fail (Section A)
0=Disabled, 1=Enabled
NO_SIG_B_MASK 0x02 0x20 N N Allows masking no composite video signal fail (Section B)
0=Disabled, 1=Enabled
EEPROM
Name add ext msk snmp trap Description
VBI_MODE_A 0x00 0x02BC 0x01 N N Allows selecting if the VBI is blanked (Section A)
0=Pass, 1=Blank
VBI_MODE_B 0x00 0x02BC 0x02 N N Allows selecting if the VBI is blanked (Section B)
0=Pass, 1=Blank
GPIO_MODE_A 0x00 0x02BD 0x01 N N Allows selecting the GPIO mode (Section A)
0=Mode 1, 1=Mode 2
GPIO_MODE_B 0x00 0x02BD 0x02 N N Allows selecting the GPIO mode (Section B)
0=Mode 1, 1=Mode 2
INVERT_GPI_POL 0x00 0x02BD 0x80 N N Changes input polarity to normally closed
0=No, 1=Yes
STATUS
Name add ext msk snmp trap Description
DCM_FAIL_A 0x01 0x01 N N Indicates FPGA DCM fail (Section A)
0=OK,1=Fail
DCM_FAIL_B 0x01 0x02 N N Indicates FPGA DCM fail (Section B)
0=OK,1=Fail
UNLOCK_A 0x01 0x04 Y Y Indicates VCXO unlock fail (Section A)
0=OK,1=Fail
UNLOCK_B 0x01 0x08 Y Y Indicates VCXO unlock fail (Section B)
0=OK,1=Fail
NO_SIG_A 0x01 0x10 Y Y Composite video signal status (Section A)
0=OK,1=Fail
NO_SIG_B 0x01 0x20 Y Y Composite video signal status (Section B)
0=OK,1=Fail
GPI1_STATUS 0x02 0x01 N N GPI1 status
0=Inactive, 1=Active
GPI2_STATUS 0x02 0x02 N N GPI2 status
0=Inactive, 1=Active
GPI3_STATUS 0x02 0x04 N N GPI3 status
0=Inactive, 1=Active
GPI4_STATUS 0x02 0x08 N N GPI4 status
0=Inactive, 1=Active
VPS_PRES_A 0x03 0x04 Y N Indicates the presence of VPS signal (Section A)
0=No, 1=Yes
VPS_PRES_B 0x03 0x40 Y N Indicates the presence of VPS signal (Section B)
0=No, 1=Yes
21