
Albalá Ingenieros | Manual
HAM3000C03
The following functions of the HAM3000C03 can be performed remotely:
- Operation mode selection: synchronizer or delayer.
- Selection of the behavior in the event of loss of the SDI signal: black or freeze.
- Synchronization mode selection: line or frame.
- Setting of the horizontal and vertical delay for the output signal.
- Supervision of the presence and format of the SDI program and auxiliary signals.
- SDI signal input-output delay supervision.
- Sync signal presence and format supervision.
- Management for up to 16 different user presets.
- Input-output audio channels reassignment definition.
- Configuration of the gain, phase inversion and delay of each output audio channel.
- Configuration of monaural audio generation.
- Configuration of Greenwich Time Signal (pips) from VITC and tone generation.
- Supervision of signal audio level in each output audio channel.
4.5.1. Details of the HAM3000C03 registers
The HAM3000C03 module provides control and status registers that can be read and
written by means of specific commands described in the communication control
module user manuals.
The parameter information grouped in the CONTROL or RAM sections is stored in
volatile memory. Any modifications to the parameters will be lost when the module
power supply is disconnected unless the "EEPROM Save" button within the software
has been pressed.
The STATUS section parameters are read-only and cannot be modified.
The EEPROM section parameters are rarely used and are stored directly in non-volatile
memory.
The parameters that can be controlled and supervised remotely for each version of
the firmware are listed below:
VERSION 1.X
CONTROL
Name
add
ext
msk
snmp trap
Description
ACTIVE_PRESET
0x00
0x3F
Y
N
Shows the active preset
32=Preset 1, 33=Preset 2, 34=Preset 3, 35=Preset 4, 36=Preset 5, 37=Preset 6,
38=Preset 7, 39=Preset 8, 40=Preset 9, 41=Preset 10, 42=Preset 11, 43=Preset
12, 44=Preset 13, 45=Preset 14, 46=Preset 15, 47=Preset 16, ?=None
29
Summary of Contents for HAM3000C03
