Albalá Ingenieros HAM3000C03, Manual, Page: 20 / 50

Albalá Ingenieros | Manual HAM3000C03
In the REFERENCE box:
NO SIG.: Red. Lights up when no recognized format sync signal is present in
the analog reference input.
UNLOCK: Red. Lights up when the equipment could not synchronize with
the reference signal or when the reference signal is missing. If the
reference signal or the input video signals are changed, it may
take a few seconds to re-synchronize. When the HAM3000C03
works in delayer mode, the digital video input is the reference,
hence these two indicators do not apply.
1.5G: Green. Detected format of the reference is HD-SDI at 1.5Gbit/s.
3G: Green. Detected format of the reference is HD-SDI at 3Gbit/s.
INTER.: Green. Detected format of the reference is interlaced. If this LED is
lit and both 1.5G and the 3G LEDs remain off, the format is
SD-SDI.
PROGR.: Green. Detected format of the reference is progressive.
In the PGM. SDI IN / AUX. SDI IN boxes:
NO SIG.: Red. Lights up when no valid video signal is present at the SDI
input. Blinks when the input signal has EDH/CRC errors.
UNLOCK: Red. In synchronizer mode, lights up when the video signal at the
input is not compatible with the analog reference. In delayer
mode, lights up when the output is not locked to the digital input.
DEEMB.: Red. Lights up when there are audio errors in any of the
embedded audio pairs.
In the PGM. AUD. PRES. / AUX. AUD. PRES. boxes:
GR. X: Green. Lights up when the audio group X is embedded within the
SDI input video signal.
In the AUDIO IN ANALOG box:
No used in the HAM3000C03.
In the AUDIO IN AES box:
NO SIG. X: Red. Lights up when no valid digital audio signal is present at the
AES X input.
20