4
1. SPEAKER
2. INFO BUTTON
3.
BUTTON
4. LCD DISPLAY
5. BUTTON
6. MENU BUTTON
7. PRESET BUTTON
8. SELECT BUTTON
▲
3
SWITCHING YOUR RADIO ON FOR THE FIRST TIME
FEATURES AND CONTROLS
13
14 15
16
12
1
2
3 4 5
6
7
8 9 10 11
9.
BUTTON
10. MODE BUTTON
11. VOLUME - BUTTON
12. ANTENNA
13. DC INPUT SOCKET
14. POWER ON/OFF SWITCH
15. HEADPHONE JACK
16. BATTERY DOOR
▼
AC operation
1. Ensure the
POWER ON/OFF
switch located at the back of the radio is in the “OFF”
position.
2.
Insert the DC power jack of the AC/DC adaptor to the DC input socket located at the back
of the radio.
3.
Plug the AC/DC Adaptor to the AC mains outlet.
4.
Slide the
POWER ON/OFF
switch to the “ON” position to turn the radio on
.
DC (battery) operation
1. Ensure the AC/DC adaptor is disconnected from the radio and AC mains.
2.
Installed the batteries (4X1.5V UM3/AA battery) into the battery compartment.
3.
Slide the
POWER ON/OFF
switch to the “ON” position to turn the radio on.
Note:
To obtain the best performance in DC operation, the use of alkaline batteries is highly
recommended.
Display backlight
When the radio is switched to on (in both AC & DC battery operation), the display backlight will
be turned on to full brightness for around 10 seconds and then go to dim, it will then be turned on
to full brightness again for 10 seconds on every key press.
LISTENING TO YOUR RADIO
Hints for better reception
This radio is fitted with a single DAB/FM telescopic antenna, to obtain the best performance, you
should fully extend the antenna and this is highly recommended for DAB reception.
DAB mode
If the radio is switched on for the first time, it will automatically enter into the DAB mode and
perform auto scanfunction. During the scan the display will show “Scanning …” together with a
slide bar that indicates the progress of the scan and the amount of stations that have been found
so far. (F. 1) (F. 2)
Once the scan has finished, the radio will select the first alphanumerically found station. You can
now press the
▲
or
▼
button to explore the found stations followed by pressing the
SELECT
button to select listening to the station.
Note:
If there is no stations found after auto scan, the radio will then enter into the Tune Select
Menu, you can now press the
▲
or
▼
button followed by pressing the SELECT button to select
“Manual tune” or “Autoscan” for stations.
F.1
F.2
