7
8. PLAYING
A
DISC
8.1
Playing a disc - DVD
8.1.1
Switch on the DVD player at the mains, press the POWER
( )
button on the player, turn on the TV and
amplifier (if connected).
8.1.2
Press the OPEN / CLOSE ( ) button (‘open’ will appear on the TV screen) and insert a disc (label side up).
For a double-sided disc place the disc with the A/1 up. Press the button again to close the disc tray (‘close’
will appear on the TV screen).
8.1.3
The unit will take a few seconds to download the initial data from the disc, the TV screen will show ‘loading’
and the disc type logo will be displayed in the top right corner of the TV screen.
8.1.4
The DVD menu / title will be displayed on screen where the casting information, product history, movie
introduction etc. can be accessed.
8.1.5
Using the NAVIGATION (
Í
Ð
Î
Ï
) buttons, highlight the desired feature or enter the number of the
chapter using the number (0-9) buttons and then press the ENTER button to confirm the selection.
8.1.6
The disc will now start to play.
8.1.7
To pause the play, press the PAUSE (
) button, the pause indicator (
) will appear on the TV screen to
show that pause mode has been selected. Press the PLAY button, the play indicator (
) will appear on
the TV and the disc will resume playing at the point that the disc was paused.
8.1.8
To stop play
x
Press the STOP (
) button ONCE, to stop the disc playing, the stop indicator (
I
) will appear on the TV
screen. If the PLAY (
) button is pressed the disc will resume playing at the point at which it is stopped.
x
Press the STOP (
) button TWICE, to stop the disc playing, the stop indicator (
) will appear on the TV
screen to show stop has been selected. If the PLAY (
) button is pressed the disc will restart at the
beginning.
8.1.9
To adjust the volume to the desired level using the VOL (+ or -) buttons. The volume will appear on the
screen. The sound can be silenced by pressing the MUTE button on the remote control and the mute
indicator ‘
’ will appear in the upper left hand corner of the screen. Press the MUTE button a second time
to restore the sound.
8.1.10 To place the DVD player into standby mode, press the POWER ( ) button on the remote control. The
power indicator will remain illuminated.
8.1.11 To turn the DVD player off at any time press the POWER ( ) button on the main unit. The power indicator
will extinguish.
8.2
Playing a disc - CD
8.2.1
Switch on the DVD player at the mains, press the POWER ( ) button on the player, turn on the TV and
amplifier (if connected).
8.2.2
Press the OPEN / CLOSE ( ) button (‘open’ will appear on the TV screen) and insert a disc (label side up).
For a double-sided disc place the disc with the A/1 up. Press the button again to close the disc tray (‘close’
will appear on the TV screen).
8.2.3
The unit will take a few seconds to download the initial data from the disc, the TV screen will show ‘loading’
and the CD will automatically start. The CD track number will be displayed briefly on the TV screen and
the display and TV will then show the time that the track has been playing.
8.2.4
To pause the play, press the PAUSE (
) button, the pause indicator (
) will appear on the TV to show
that pause mode has been selected. Press the PLAY (
) button to resume playing at the point that the
disc was paused.
8.2.5
To adjust the volume to the desired level using the VOL (+ or -) buttons. The volume will appear on the
screen. The sound can be silenced by pressing the MUTE button on the remote control and the mute
indicator ‘
’ will appear in the lower left hand corner of the screen. Press the MUTE button a second time
to restore the sound.
8.2.6
To select a specific track to be played, enter the track number directly and the disc will start to play from
the track selected. Alternatively use the NEXT / PREV (
/
) buttons to move forward or back until the
track of choice is located.
8.2.7
To stop play
x
Press the STOP (
) button ONCE, to stop the disc playing, the stop indicator (
I
) will appear on the TV
screen. If the PLAY (
) button is pressed the disc will resume playing at the point at which it is stopped.
x
Press STOP (
) button TWICE, to stop the disc playing, the stop indicator (
) will appear on the TV
screen to show stop has been selected. If the PLAY (
) button is pressed the disc will restart at the
beginning.
8.2.10 To place the DVD player into standby mode, press the POWER (
) button on the remote control. The
power indicator will remain illuminated.
8.2.11 To turn the DVD player off at any time press the POWER ( ) button on the main unit.
