Auto Search
(Fig 18)
After initial installation it may be necessary to reinstall all the
stations especially if new stations have been added.
Use the ▲▼ buttons to select Auto Search and then press
OK
.
The sub menu (Fig 18) will be shown. Use the ▼ button to
select
Start
. You must confirm your selection, use the ◄ button
to select
Yes
and press
OK
to start auto search.
A display will show progress (Fig 19).
When tuning is complete the TV will display Fig 7 see Page 11.
You must set the local region as described on Page 11.
When complete the TV will display the first channel on the
channel list, this is normally BBC 1
Basic Features (TV)
Tuning Menu
Fig 17
Fig 18
Fig 19
Fig 20
Digital Installation
Should you move to another location you may need to reinstall
the DTV channels. Press the
MENU
button and using the ▲▼
buttons Select
Setup
and select
First Time Installation
.
Press
OK
and the TV will enter the installation sequence. See
Page 10
Favourite Selection
(Fig 17)
To select your favourite channels once the memories have been set,
press the
FAV.
button on the remote control. Use the ◄► buttons to
select which favourite memory is required. Use the ▲▼ buttons to
select which favourite channel is required and press
OK
. The TV will
now switch to that programme.
To exit the menu press
EXIT
or wait for OSD to timeout.
Manual Search
(Fig 20)
It may be necessary to add more digital channels as they are
provided by the programme providers or manually tune stations
for reasons (above).
Use the ▲▼ buttons to select
Manual Search
and then press
OK
. The sub menu (Fig 19) will be shown.
Use the ▲▼ buttons to select
START
and press
OK
. Using
the ▲▼ buttons select
Tuning
and use the ◄► buttons to
select the correct channel number. Press
OK
to show Fig 18.
The correct channel numbers are available from the website
www.dtg.org.uk, and select transmitters. If you do not know
which region you are in, go to website www.digitaluk.co.uk and
insert your postcode, you will then be shown which region you
are in.
At the bottom of the menu you will see two bar scales, one
showing the quality of the signals and one the signal strength.
If you need to refresh or add a station, select
Start
. A display as
in Fig 19, will show how many stations are received, and the TV
will revert back to the first station in that group.
14
For any help concerning setup and use of your TV please call the
Customer Help Line: 0845 604 0105
