AX1240S-AP-0202C_R2X
21
11. MAC-based Authentication Configuration and Operation
11.4.2 Settings for authentication processing
(4) Setting roaming (allowing communication for moved ports of
authenticated terminals) [Change]
The notes have been corrected as follows:
Before the change:
Notes
Roaming operates in the following conditions:
- Ports for dynamic VLAN mode before and after moving
- Post-authentication VLAN before moving has been specified by the configuration command
switchport
mac vlan
.
After the change:
Notes
Roaming operates in the following conditions:
- Ports for dynamic VLAN mode before and after moving
(5) Authentication exclusion [Change]
In
(b) Terminals excluded from authentication
,
Configuration command example
has been corrected as follows and
notes have been added.
Before the change:
Configuration command example
1.
(config)# vlan 200 mac-based
(config-vlan)# mac-address 1234.5600.e001
(config-vlan)# exit
Sets a MAC address of a terminal excluded from authentication (MAC address of shared server:
1234.5600.e001 in the figure) to MAC VLAN ID 200.
2.
(config)# mac-address-table static 1234.5600.e001 vlan 200 interface fastethernet
0/5
Sets the MAC address (MAC address of shared server: 1234.5600.e001 in the figure) of a terminal
permitted to connect but exempt from authentication with port 0/5 in MAC VLAN ID 200 to the MAC
address table.
After the change:
Configuration command example
1.
(config)# vlan 200 mac-based
(config-vlan)# mac-address 1234.5600.e001
