6
Before first use
•
Unpack all parts of the product.
•
Check for completeness and shipping damage immediately after unpacking. If your shipment is damaged or
incomplete, please contact your dealer.
•
Then clean the unit as described in the cleaning and care section.
CAUTION! Always unplug the appliance before assembling, checking, changing
or removing accessories!
Checking the motor filter
•
See
1
.
•
The motor filter (26) is located in the dust bag compartment, behind the dust bag. Unlock the cover (16) using
the cover release handle (17) and lift it until it locks into position.
•
Pull the motor filter (26) and motor filter basket (27) out of the receptacle and take out the filter.
•
Check the filter for damage or defects. If it is damaged, contact your dealer.
•
Insert the motor filter (26) back into the filter basket (27), paying attention to the retaining cams.
•
Slide the filter basket and motor filter back into the receptacle until they stop.
Checking the HEPA exhaust filter
•
See
2
.
•
Unlock the exhaust filter cover (13) by pressing the cover release button (28), and remove the cover.
•
Take out the HEPA exhaust filter (29) and check it for damage. In case of damage, contact your dealer.
•
Put the HEPA exhaust filter (29) back and lock the filter cover (13).
Checking the dust bag
•
See
3
.
•
The appliance is supplied with a dust bag (25) already inserted. Locate it.
•
Open the cover (16).
•
Take out the dust bag (25) from the guide rail (30).
•
The dust bag (25) must be correctly inserted into the guide rail (30) and should remain free from damage. If
the dust bag is damaged, replace it.
•
Slide the dust bag into the guide rail (30) again.
•
Close the cover (16).
1
26
27
28
29
25
30
13
2
3
VC2200-GB.indd 6
23/08/2011 9:40 AM
