20
notes:
•
For the best results when pureeing solid foodstuffs, only add small portions in succession, not all
ingredients at the same time.
•
Before starting, cut solid food into small pieces (2 to 3 cm).
•
Process a maximum of 6 ice cubes at a time. Max.size of ice cube: approx. 20mm.
•
If solid foodstuffs and liquids are being mixed, start with a small quantity of liquid. Bit by bit pour more
liquid through the fill opening (2).
•
Always start with the lower speed
1
. If necessary, then switch to the higher speed
2
or to
p
, the pulse
function.
•
When mixing solid foodstuffs and/or very viscous liquids, we recommend using the pulse function
p
, so
as not to jam the blades (6).
•
Remove the shell/skin before processing.
•
Do not use this appliance to process hard foodstuff, such as nuts.
attention!
•
To avoid the risk of serious burns, never mix hot food or hot liquid.
•
Do not use the appliance without having put any food into the jug (4).
•
After use: Turn the operating switch (9) to position
0
and pull the mains plug (10) out of the socket.
attention!
•
Pull the mains plug (10) out of the socket, before you take out the jug (4). The blades (6) must already
have come to a standstill.
•
Always hold the jug (4) by the handle (5).
use the correct quantities of ingredients:
•
The jug (4) is equipped with 2 measuring scales (11) for measuring ingredients:
500 ml
750 ml
1000 ml
1250 ml
1500 ml
10 Oz.
20 Oz.
30 Oz.
40 Oz.
50 Oz.
•
Do not fill the jug (4) above the maximum quantity.
•
The measuring cup (2) is provided with a 25 ml mark. This is useful when smaller quantities of food are supposed
to be added.
please note:
The 25 ml mark is not calibrated and only serves as a reference.
cleanInG anD care
Before cleaning:
Switch off the appliance and pull the mains plug (10) from the socket.
Wait until the blades (6) have come to a complete stop before you begin cleaning.
For reasons of hygiene the appliance should be cleaned after each use.
•
Do not use solvents or abrasive cleaners, metal objects or hard brushes.
cleaning the motor unit (8) and mains plug with power cord (10):
•
never immerse these parts in water or other liquids.
•
Wipe down with a dry or lightly moistened cloth and some detergent.
cleaning the measuring cup (1), lid (3), jug (4), and blades(6)
•
Clean with water and some mild detergent.
•
Then rinse off under flowing water.
•
Dry all parts before using the appliance again.
cleaning the blade unit
•
Make sure the glass jug (4) is empty. Let the jug up-side-down.
•
Turn the blade base (12) counter clockwise to remove it together with the blade unit (6) from the glass jug (4).
•
Take off the sealing ring from the blade unit (6).
•
Clean all parts carefully with warm water and some mild detergent.
Warning risk of Injury!
The blades (6) are very sharp. When cleaning the blades be particularly careful.
operaTIon
P150303_ALASKA_TB1570S_IM_EN_V01_150924.indd 20
19/10/2015 11:34 AM
