User Guide 8
12 in.
5
6
7b
7a
7
S N
A P
Tab
7a. Install top half of the clear plastic bulb holder (these are
taped inside the light box next to the sockets) by pushing it over
the light bulb and into the clear plastic bottom half. Connect
one leg of the top clip (farthest away from you) onto the lower
clip first.
7b. Place index finger under bottom clip for support and using
your thumb, gently squeeze top clip down onto and over side tab
of lower clip until it snaps into place and locks onto lower clip.
7c. Repeat the process for both bulbs.
8. Slide the diffuser cover back in place, rough side out. Replace
the white metal end strip over diffuser cover and reinstall the
screws.
9. Plug unit into a 120-volt outlet.
10. Turn unit on by depressing red button on top of unit.
Bulb Installation Directions - read before installation:
USING
Y
OUR
NOR
THST
AR
1
0,
00
0
