Section 1
Introduction
The AlarmSaf RMBE Rack Mount Battery Enclosure provides one or two 12VDC or 24VDC battery outputs in a
standard 19” rack mountable enclosure. The enclosure contains two independent battery sets consisting of
two 7AH batteries each. The two sets can also be paralleled for a single battery set of increased capacity.
Designed as a companion product to the popular AlarmSaf RMDC series, but may also be used to provide
battery backup to panels, or any other rack mountable equipment requiring a 12VDC or 24VDC sealed
lead acid battery set.
Configuration is via pluggable jumpers on the back panel of the enclosure, allowing configuration without
opening unit
Contains two battery sets of two 7AH batteries (total of four 7AH batteries)
Each individual battery is protected by an internal self resetting PTC
Each battery set can be configured for either 12VDC or 24VDC
When set for the same voltage, the two battery sets can be paralleled for double the AH capacity
Multiple RMBE enclosures may be paralleled for additional amphour capacity
Pluggable output terminals feature locking screws
Unit is standard EIA rack mount size at 19” width and 3.5” (2RU) height - depth is 10”
Easy battery replacement
Configuration Capabilities:
14AH @ 12V (Single Output)
24V
24V
7AH @ 24V
7AH @ 24V
24V
24V
14AH @ 12V
7AH @ 24V
12V
24V
7AH @ 24V
14AH @ 12V
24V
12V
28AH @ 12V (Single Output)
12V
12V
14AH@12V
14AH@12V
12V
12V
Battery Set 2
Battery Set 1
Output 2
Output 1
Voltage
Rack Mount Battery Enclosure Installation Instructions
5/27/2009, 11:42:41 AM
52-342 Rev A.01
Page 4 of 14
AlarmSaf
65A Industrial Way, Wilmington, MA 01887 978 658 6717 www.alarmsaf.com
