4
Supported Products
DB9 to DB9 Serial Cable
Enroll ProxCards into the AL-PRE, then transfer this ProxCard
®
data from the AL-PRE to the computer via
this 9-pin DB9 to DB9 serial cable.
Proximity Card Reader/Enroller
(AL-PRE)
An
AL-PRE
is used to quickly enroll multiple ProxCards
®
and ProxKey
®
keyfobs into DL-Windows. Use
the supplied 9-pin DB9 to DB9 serial cable to connect the AL-PRE to your computer’s serial COM port.
Compatible with most HID ProxCards
®
and ProxKey
®
keyfobs (37 bits or less). For PDL and PL series
locks only.
ProxCard
®
/ ProxKey
®
Keyfob
Compatible with most HID ProxCards
®
and ProxKey
®
keyfobs (37 bits or less).
Note:
ProxCard
®
and ProxKey
®
are trademarks of the HID
©
Corporation.
H I D
HID CORPORATION
PROX-
CARD
®
H I D
PROX
KEY
®
DL-Windows Software Application
Alarm Lock Trilogy Microsoft Windows-based software application, v4.0.0 or higher, supports Trilogy Net-
worx and Trilogy Standalone Locks, with single database.
Free of charge
and downloadable online at
www.alarmlock.com.
DL-Windows software is the basis for the wireless lock programming inter-
face.
For those unfamiliar with using DL-Windows software, stop here and review the DL-Windows User
Guide (OI237) and the Wireless Network Setup & DL-Windows Configuration Instructions, (OI352).
AL-IM80211
AL-IME
AL-IMEPOE
AL-IMEPOEP
AL-IM SERIES WI-FI Gateway Module
The PL6100 lock contains an integral radio that transmits and receives data--via a private wireless signal--
to an intermediate device called a Gateway module. In turn, this Interface Module is connected (either
wirelessly or wired) to a computer network such as a LAN or corporate Intranet. A Windows PC connected
to this network can control and program all PL6100 locks by the use of the
DL-Window
software (see
OI237 and OI352). With access rights to the software, one computer--or several--can control the software
and consequently can control the devices in the system. Several Gateway device models are available:
•
"Wireless/Wired" AL-IM80211
Hardwired/Wireless Gateway Interface Module. Supplied with its own
class 2 transformer to supply power and supports connection to a network either using 802.11 or a
standard Ethernet cable. This "Wireless/Wired" Gateway module has two antennas, one for the
proprietary radio connection to the PL6100 and the other for 802.11 network transmissions. Ensure
adequate 802.11 coverage in the area where the "Wireless/Wired" Gateway is mounted. Supports up
to 63 Networx Locks. Ceiling- or wall-mountable.
•
"Wired" AL-IME
Hardwired Gateway Interface Module, supports up to 63 Networx Locks, connects
directly to a network using a standard RJ-45 Ethernet cable. This model has one antenna used to
transmit to the PL6100 via an Alarm Lock proprietary radio connection.. Ceiling- or wall-mountable.
Powered with Class 2, 6VAC transformer (supplied).
•
"Power over Ethernet" AL-IMEPOE
Hardwired Gateway Interface POE (Power Over
Ethernet), supports up to 63 Networx Locks, connects directly to a network using a standard RJ-45
Ethernet cable and POE. This model has one antenna used to transmit to the PL6100 via an Alarm
Lock proprietary radio connection. Ceiling- or wall-mountable.
•
Gateway "Plenum Rated POE" AL-IMEPOEP
- Same as above "
AL-IMEPOE
", with added enclosure
protections and installation hardware for mounting above "drop-ceiling" tiles or other locations subject
to air pressure changes (HVAC air-filled spaces, etc.).
Summary of Contents for Wireless Trilogy Networx PL6100
Page 15: ...15 NOTES ...
