26
To Disarm a Burglary Control Panel
90. Relay Activation
(Open Time Window)
; 9 0 ;
[ _ ]
;
[ _ _ _ _ ]
:
(Day) (Time)
Functions 90 and 91 allow you to set up a window of time where if any
Group 1
User Code is entered within this window,
the relay will be activated for 2 seconds. This relay can be used with a Control Panel that has a key switch disarm option.
For additional information, see "Group 1 Activated Features" on page 28.
•
Also program Relay Function 6 using Function 67 (
; 6 7 ; 6 :
).
•
For
day
enter: 1 for Sunday, 2 for Monday, 3 for Tuesday, 4 for Wednesday, 5 for Thursday, 6 for Friday, 7 for Saturday,
8 for Monday to Friday, 9 for Saturday and Sunday, and 0 for all days of week.
•
Enter time of day in 24 hour format (for example, for 2:15 PM, enter 14:15).
Scheduled Relay Activation
(Group 1 Activated)
; 9 1 ;
[ _ ]
;
[ _ _ _ _ ]
:
(Day) (Time)
91. Relay Activation
(Close Time Window)
SCHEDULES GROUP 1 ACTIVATED
3
NOTES
1.
Group 1 Disarms a Burglary Control
Panel
will always disarm an alarm
system. Arming should be performed
by other means (such as Alarm Panel
Keypad/Schedule).
2.
Use a qualified electrical/alarm
specialist to review your current alarm
system and add additional components
as needed (such as a relay, wire,
resistors, connectors and/or diodes) and
re-program the operation of your alarm
system as needed.
Programming Functions (cont'd)
Alarm Panel with Switched Input for Disarming
Burglary
Control
Panel
Switch
Output
Relay
Output
Alarm Panel with Switched Input for Toggled Arm/Disarm
Burglary
Control
Panel
Switch
Output
Relay
Output
