manualshive.com logo in svg

Alarm Lock Eagle 8000 Series, Operating Manual, Page: 5 / 12

Share
Download
Alarm Lock Eagle 8000 Series Operating Manual Download Page 5

KEYPAD CONTROLS & INDICATORS

 

Numerical Display

Flashes Digits l-8 - indicates which non-
24-Hour Zones are in an alarm condition,

and which Day Zones are in a trouble
condition. (Option: can also indicate a

Chime Zone.)

Flashes "P" - indicates a priority condition
(armed with a Priority Zone in trouble,
armed without resetting a Day Zone, or
armed without ac power available to the
sys tern).

ARMED (Red) Light

l 

Steady - system is armed.

l 

Flashes - alarm on a non-24-Hour Zone.

l 

Flashes (fast) - entry delay cancelled.

READY 

(Green) Light

ZONE

  A R M E D

  R E A D Y

DISPLAY

TEST BYPASS ZONES OPEN

ALARM LOCK SYSTEMS

J,

 

 Steady - system disarmed, all non-24-Hour Zones OK.

 Pulses once every second - trouble on any non-24-Hour Zone.

l 

Flashes (fast) - trouble on Day Zone.

BYPASS (Yellow) Light

Steady - one or more zones manually bypassed (shunted). (Dealer-programmable to display Auto-

Bypassed Zones and bypassed Priority Zones as well.

AUX / FIRE TROUBLE (Bottom 

Red) Light

Steady - Aux / Fire Zone in alarm condition.

Flashes - Aux / Fire Zone in trouble condition.

Keypad Sounder

l 

Steady Tone - a priority condition exists.

l 

Steady Tone (when entering) - entry delay in progress.

l 

Beep (programmed duration) - “Chime” feature activated.

l 

Beep (2 seconds) - system armed with a zone in trouble.

l 

Pulsing - Day Zone or Fire Zone in trouble.

(To stop sounder “Trouble” warnings, hold down Key [9] for 2 seconds.)

5

Summary of Contents for Eagle 8000 Series













Reviews:

No comments