Alarm Lock Eagle 8000 Series Operating Manual Download Page 2 | Manualshive

Page: 2 / 12

Alarm Lock Eagle 8000 Series Operating Manual Download Page 2

Please read this guide thoroughly to familiarize yourself with your new security system. Check

the Glossary on pages 3-4 for any terms that may be unfamiliar to you. Keep this booklet handy

for future reference. Note especially the ALARM PLAN on page 14. Your alarm specialist will

help you fill it out and explain the various system features and operating procedures.

NOTE:

You’ll probably find items mentioned in this booklet which do not apply to your system. Eagle
8000-Series and 8000DL-Series control panels have such a wide variety of features that few, if
any, security systems will ever need them all. Your alarm professional has chosen appropriate
features for your situation. Ask him about them.

Your system has been carefully designed and engineered to the highest industry standards. To
assure optimum safety and security, familiarize yourself with this equipment and periodically

check its condition and state of readiness.

TABLE OF CONTENTS

GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

KEYPAD CONTROLS & INDICATORS

.........................

.5

HOLD-DOWN FUNCTIONS

...............................

.6

SELECTING AND PROGRAMMING YOUR CODES

..................

.7

SETTING THE ALARM (ARMING) WHEN LEAVING

. . . . . . . . . . . . . . . . .

.8

TURNING OFF THE ALARM (DISARMING) WHEN RETURNING . . . . . . . . . .

.9

PROTECTING YOURSELF WHILE ON THE PREMISES . . . . . . . . . . . . . . . . 10

CENTRAL-STATION MONITORING . . . . . . . . . . . . . . . . . . . . . . . . . .

11

FIRE PROTECTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12

ALARMPLAN

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . 14

REMEMBER: TO SHUT OFF AN ALARM WHILE ARMED, ENTER YOUR CODE!

CENTRAL STATION: - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

2

«
1
2
3
4
...
»

Summary of Contents for Eagle 8000 Series













Reviews:

No comments