Resetting the Smart Water Valve to Factory Default Settings:
Caution: Resetting the Smart Water Valve to its factory default settings will cause the device to
remove itself from the network and restore all user settings to their default values.
Local Reset: Press and hold the Networking [Insert Radio Icon] button for 15 seconds. All
three LEDs will blink for five seconds and the device will restart.
Manual Valve Actuation:
In the event of power loss or system failure, the Smart Water Valve can be manually actuated
using the following procedure:
1.
Remove the actuator from the valve by pulling the actuator away from the valve.
2.
Use a pair of pliers, adjustable crescent wrench or flat head screwdriver, to move the
valve stem to the correct position, as shown below.
