Mounting options
Consider the following mounting requirements. Review
Step 3: Mount the Alarm.com Flex IO™ sensor
for
diagrams and more information.
• Using screws: Holes are located in the battery
compartment.
• Using zip ties: Use cutouts at the top and bottom of
the device to make sure the Alarm.com Flex IO™
sensor is mounted flush to the install surface.
Important
: A mounting tamper is located on the back of
the Alarm.com Flex IO™ sensor. This tamper button
must be fully pressed (until you hear a clicking sound) to
avoid reporting a mounting tamper malfunction.
If not applicable for your installation, tampers can be
disabled by updating device settings on the Partner
Portal or MobileTech.
Updated: Mon, 10 Oct 2022 23:21:36 GMT
5
