How will this Alarm.com Flex IO™
sensor be used?
Description
Installation guide
Contact Sensor
using built-in reed
switch
Selecting
Contact Sensor
allows you
to use the Flex and built-in reed
switch to monitor if something is
opened or closed.
•
Using the Alarm.com Flex IO™
sensor as a contact (built-in
reed switch)
Wired Contact Sensor
using wired
loop input
Selecting
Wired Contact Sensor
allows you to wire a contact sensor
to the Flex using the loop input
terminal.
•
Alarm.com Flex IO™ sensor -
Wired Contact (Loop Input)
Installation Guide
Pull-Apart Sensor
using pull-apart
or Magnapull sensor
Selecting
Wired Contact Sensor
allows you to use the Flex with a
pull-apart or Magnapull sensor. This
could be used to determine if
something is moved from its
location.
•
Alarm.com Flex IO™ sensor -
Pull-Apart Installation Guide
Gate control
using a compatible
gate controller
Selecting
Gate Control & Contact
Sensor
or
Gate Control & Wired
Contact
allows you to use the Flex
with a compatible gate controller.
This allows you to monitor and open
the connected gate controller.
•
Alarm.com Flex IO™ sensor -
Ghost Controls TSS1
Installation Guide
•
Alarm.com Flex IO™ sensor -
LiftMaster LA400/500
Installation Guide
•
Alarm.com Flex IO™ sensor -
Mighty Mule MM371W
Installation Guide
For more information about use cases, see
Alarm.com Flex IO™ sensor - Supported Use Cases
.
Expand all
Equipment
In the box:
• Alarm.com Flex IO™ sensor
• Magnet
• 4x AA 1.5V lithium batteries
• Installation guide
• 300 kΩ resistor (optional)
Recommended tools and supplies (not included):
Updated: Mon, 10 Oct 2022 23:21:36 GMT
2
