Copyright © 2022 Alarm.com
|
www.alarm.com
|
v4.0
4
ADC-480Q Module
|
User Guide
Regulatory Information
Listings
FCC ID: YL6-143480Q, IC: 9111A-143480Q
This device is tested to be compliant with FCC Part 15.249 and
ISED RSS-210.
Contact Information
For additional information and support on Alarm.com products and services,
please visit
www.alarm.com/dealer
or contact Alarm.com technical support
at 1-866-834-0470.
The host device must display the following language on its exterior:
Contains: FCC ID: YL6-143480Q, IC: 9111A-143480Q
Contains: FCC ID: XMR202007BG95M6, IC: 10224A-2020BG95M6
OR
Contains: FCC ID: XMR201909EG91NAX, IC: 10224A-2019EG91NAX
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
***************************************************************
FCC
Changes or modifications not expressly approved by Alarm.com can void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
ISED
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Cet appareil contient des émetteurs / récepteurs exempts de licence qui sont
conformes aux RSS exemptes de licence d'Innovation, Sciences et
Développement économique Canada. Son fonctionnement est soumis aux
deux conditions suivantes:
(1)
Cet appareil ne doit pas provoquer d'in-terférences.
(2)
Cet appareil doit accepter toutes les interférences, y compris les
interférences susceptibles d'entraîner un fonctionnement indésir-able de
l'appareil.
