Alarm.Com ADC-3035L, Installation Manual

Page: 5 / 16

3
• The Car Connector cannot share
the Vehicle Bus (its internal
communication network) with other
devices that are also connected to
the Vehicle Bus. Do not use the Car
Connector in vehicles with devices
such as wheelchair lifts or OnStar®
that also communicate on the Vehicle
Bus, or with a Y-cable to connect
multiple devices to the OBD-II port at
the same time. For any questions on
whether a device in your vehicle is
connected to the Vehicle Bus, please
contact your Alarm.com Authorized
Service Provider.
• The Car Connector uses a small
amount of power from the vehicle
battery while the ignition is off. If the
vehicle’s ignition will be off for more
than a week, it is recommended to
unplug the Car Connector to prevent
the possibility of draining the
vehicle battery.
Pre-installation
checklist
• Car Connector (included).
• Vehicle with an OBD-II port
(standard on vehicles manufactured
in 1996 or later). Hybrid and electric
vehicles are not currently supported.
• The vehicle should not be in an
underground garage or in an area
where cellular coverage may not
be available.
• A smartphone or tablet with an
Internet connection.
3