Alarm.Com ADC-3035L, Installation Manual

Page: 4 / 16

33
Installation
precautions
• Use an Alarm.com Authorized
Service Provider to install or
remove the Car Connector.
• If you choose not to use an Alarm.
com Authorized Service Provider
to install or remove the Car
Connector, please carefully follow
these instructions.
• Choose a safe location before
installing, removing, or reconnecting
the Car Connector.
• The Car Connector should never be
plugged into or unplugged from
the vehicle’s OBD-II port while the
vehicle’s ignition is ON or in ACC/
ACCESSORY mode, as this may cause
issues such as dashboard lights to
come on, but that should not affect
the operation of the vehicle itself.
Please ensure that the ignition is
completely OFF before plugging in or
unplugging the Car Connector.
Should dashboard lights come on,
they can usually be cleared by turning
off the ignition and unplugging the
Car Connector.
• When the Car Connector is plugged
in, ensure it is installed securely
and cannot easily be removed or
come loose. If necessary, make use
of cable ties to ensure a
secure connection.
• Do not install the Car Connector in
a manner that could obstruct the
driver’s ability to safely operate the
vehicle. If necessary, make use of an
OBD-II extender cable to re-locate
the position of the Car Connector.
2